Archives

Product Overview

FRONT SIDE

  1. Battery Cover
  2. Battery Screw (Please prepare your own screwdriver)
  3. Direction Mark
  4. LED
  5. Button
  6. Rubber Cap
  7. Micro USB Connector
BACK SIDE

  1. Fixing Nut (1/4-20 UNC 4.5mm)
  2. Magnetic Force Detection Area
  3. Ventilation Hole

 

Specifications

Basic Specifications

Sensors 6-Axis Sensor (3D-Acceleration + 3D-Gyroscope)
Atmospheric Pressure / Temperature
Proximity
Water Resistance IPX4
Battery CR2032
Size※ W40 x H55 x D12(mm) / 1.6″ x 2.2″ x 0.5″
Weight※ 28(g) / 0.99(oz)
※ Without cables and batteries.

Battery Duration

Standby Mode Approximately 2 weeks
Logging Up to 7 days
  • Will vary depending on the surrounding environment such as temperature.
  • Will not start logging if maximum memory capacity has been reached.

About Memory Capacity

Max. Logging Count Max. 64 Times
Max. Sample Numbers Approximately 860,000 Samples

Sampling Ratio Total Recordable Time
12.5 Samples / sec (Every 80ms) Approximately 19 hrs
1 Sample / sec (Every 1000ms) Approximately 240 hrs
    • These values are the maximum values without erasing data.
    • If either maximum value is reached, logging will not continue, please extract and erase data to start logging again.
    • Please set sampling ratio via the PC application.

Hardware Precautions

Please Note

  • LOG-1 can be used in temperatures of 0℃ to 40℃ and in less than 90% humidity environments. Extremely low or high temperatures may cause the battery to lose charge quicker than usual and could temporarily stop the device as well.
  • Do not use this device in any location that is subjected to water, fire, or extremely high temperatures. Doing so could damage the device or result in electric shock.
  • Dropping the device or using carelessly may cause failure or damage and/or injury.
  • If the device becomes unusually hot, stop using immediately.
  • If the device is disassembled, warranty and support are void.

Before Using

Prepare Before Using

  • LOG-1 and Other Included Items
  • Cross Slot Screwdriver : For battery installation (Not included)
  • PC (OS: Windows 8.1/10) : To extract data and create movies
    ※Please refer to this page for details on required PC specifications.
  • Video Camera (Action Camera / Video Camera / Smartphone)

Supported Video Cameras

  • If you are not using XON REC-1, please check your camera supports the following formats.
    Movie File Format MP4, Mov (AVC/H.264) Aspect Ratio 16:9 (Landscape)
  • GPS (Route, Elevation, Speed) overlays are only available for REC-1.

Box Contents

The following items are included with this product.
Please confirm all items are inside the box. If you find any items are missing, please contact our support team (support-global@cerevo.com).

QTY
  LOG-1 1
  Mounting Bracket 1
  Magnet 1
  Micro USB Cable 1
  Coin Battery 1
  Quick Setup Guide
(Warranty Confirmation)		 1

Web Updates

  • 2017-02-14
    • Open source versions of RIDE-1 frame mount and housing 3D model data released.
  • 2017-01-31
    • Added password reset function.
    • Improved usability of activity display screen.

Cannot see uploaded logs on XON Cloud

It takes about 10 minutes before you can see activity logs on XON Cloud after uploading from the RIDE-1 app. Please check after waiting for more than 10 minutes.