LOG-1

Software License

Be sure to read the Software License Agreement before using XON LOG-1 Overlay Movie Exporter and XON LOG-1 Utility (the “Software”). You can use this software only when you confirm and agree to the following contents.

■ Article 1 (Copyright)

Regarding this Software for which Cerevo Inc. (“Cerevo”) and / or Cerevo’s licensee have copyright, Cerevo has the necessary rights to license it to you. Regarding the use of this Software, you are not entitled to any rights except as permitted under this Agreement, All rights relating to the Software belong to the licensee’s of Cerevo and / or Cerevo.

■ Article 2 (License Agreement)

This Software is software (including upgrade versions) for XON LOG-1 (the “Product”), you can use the Software only with this Product, subject to the contents of this Agreement.

■ Article 3 (Restriction on Use)

1. You can not copy the Software and accompanying document without authorization.
2. You can not lend the Software to any third party regardless of charge or free of charge without authorization.

■ Article 4 (Scope of Warranty)

Please be aware that you can not continue to operate without causing problems in any situation.

1. Cerevo does not guarantee data saved on the Product from changes or deletion due to a problem with this Software.

2. Cerevo will not be liable for incidental or indirect damages, loss of remedy, loss of profit or any other damage arising from the use or unavailability of the Software.

3. Cerevo does warrant the Product or Software if any defects occur due to changes or modifications by you. In addition, Cerevo will not be responsible for any damages to customers as a result of issues caused by user changes or remodeling.

■ Article 5 (Termination of Contract)

1. You can cancel this agreement.

2. If you breach this Agreement, Cerevo can terminate this Agreement and terminate your use of the Software.

3. Cerevo can cancel this Agreement at its own convenience.

4. Upon termination of this Agreement, you must destroy the Software (including all copies) and accompanying documentation.

■ Article 6 (Others)

1. When bringing this Software and this Product outside Japan, you must abide by the Foreign Exchange and Foreign Trade Control Law of Japan, the US Export Control Law and other national laws and regulations.

2. This Agreement shall be construed and governed by the laws of Japan and in the event of a legal dispute relating to this Agreement, the Tokyo District Court in Japan shall be held as the exclusive jurisdictional court.

3. This English version of the Software License Agreement is provided for your convenience. Please refer to the Japanese Software License Agreement for the official contents.

■ Article 7 (Open Source Software)

This software includes open source software (MIT, BSD, Apache 2.0 license). Please refer to the license of each open source software.
In the event of a conflict between the description of the license of the open source software and this Agreement, the description of the license of the open source software takes precedence.

Open source software and licenses included in this Software

Json.NET
Copyright (c) 2007 James Newton-King
Released under the MIT license
https://github.com/JamesNK/Newtonsoft.Json/blob/master/LICENSE.md < / a>

AsyncEx
Copyright (c) 2014 StephenCleary
Released under the MIT license
https://github.com/StephenCleary/AsyncEx/blob/master/LICENSE

OxyPlot
Copyright (c) 2014 OxyPlot contributors
Released under the MIT license
https://github.com/oxyplot/oxyplot/blob/develop/LICENSE

ReactiveProperty
Released under the MIT license
https://github.com/runceel/ReactiveProperty/blob/master/LICENSE.txt

MahApps.Metro
Copyright (c) 2016 neuecc, xin9le, okazuki
Released under the MIT license
https://github.com/MahApps/MahApps.Metro/blob/master/LICENSE

Material Design In XAML Toolkit
Copyright (c) James Willock, Mulholland Software and Contributors
Released under the MIT license
https://github.com/ButchersBoy/MaterialDesignInXamlToolkit/blob/master/LICENSE

Windows API Code Pack 1.1
Copyright (c) 2014 Dev Kimchi
Released under the MIT license
https://github.com/devkimchi/Windows-API-Code-Pack- 1.1 / blob / master / LICENSE

Serilog
Licensed under the Apache License, Version 2.0 (the “License”);
https://github.com/serilog/serilog/blob/dev/LICENSE

Reactive Extensions
Copyright (c) .NET Foundation and Contributors
Licensed under the Apache License, Version 2.0 (the “License”);
https://github.com/Reactive-Extensions/Rx.NET/blob/master/LICENSE < / a>

LZ4net
Copyright (c) 2013-2017, Milosz Krajewski
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and / or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

HIDApi
Copyright (c) 2010, Alan Ott, Signal 11 Software
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and / or other materials provided with the distribution.
* Neither the name of Signal 11 Software nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Box Contents

The following items are included with this product.
Please confirm all items are inside the box. If you find any items are missing, please contact our support team (support-global@cerevo.com).

QTY
  LOG-1 1
  Mounting Bracket 1
  Magnet 1
  Micro USB Cable 1
  Coin Battery 1
  Quick Setup Guide
(Warranty Confirmation)		 1

Before Using

Prepare Before Using

  • LOG-1 and Other Included Items
  • Cross Slot Screwdriver : For battery installation (Not included)
  • PC (OS: Windows 8.1/10) : To extract data and create movies
    ※Please refer to this page for details on required PC specifications.
  • Video Camera (Action Camera / Video Camera / Smartphone)

Supported Video Cameras

  • If you are not using XON REC-1, please check your camera supports the following formats.
    Movie File Format MP4, Mov (AVC/H.264) Aspect Ratio 16:9 (Landscape)
  • GPS (Route, Elevation, Speed) overlays are only available for REC-1.

Hardware Precautions

Please Note

  • LOG-1 can be used in temperatures of 0℃ to 40℃ and in less than 90% humidity environments. Extremely low or high temperatures may cause the battery to lose charge quicker than usual and could temporarily stop the device as well.
  • Do not use this device in any location that is subjected to water, fire, or extremely high temperatures. Doing so could damage the device or result in electric shock.
  • Dropping the device or using carelessly may cause failure or damage and/or injury.
  • If the device becomes unusually hot, stop using immediately.
  • If the device is disassembled, warranty and support are void.

Specifications

Basic Specifications

Sensors 6-Axis Sensor (3D-Acceleration + 3D-Gyroscope)
Atmospheric Pressure / Temperature
Proximity
Water Resistance IPX4
Battery CR2032
Size※ W40 x H55 x D12(mm) / 1.6″ x 2.2″ x 0.5″
Weight※ 28(g) / 0.99(oz)
※ Without cables and batteries.

Battery Duration

Standby Mode Approximately 2 weeks
Logging Up to 7 days
  • Will vary depending on the surrounding environment such as temperature.
  • Will not start logging if maximum memory capacity has been reached.

About Memory Capacity

Max. Logging Count Max. 64 Times
Max. Sample Numbers Approximately 860,000 Samples

Sampling Ratio Total Recordable Time
12.5 Samples / sec (Every 80ms) Approximately 19 hrs
1 Sample / sec (Every 1000ms) Approximately 240 hrs
    • These values are the maximum values without erasing data.
    • If either maximum value is reached, logging will not continue, please extract and erase data to start logging again.
    • Please set sampling ratio via the PC application.

Product Overview

FRONT SIDE

  1. Battery Cover
  2. Battery Screw (Please prepare your own screwdriver)
  3. Direction Mark
  4. LED
  5. Button
  6. Rubber Cap
  7. Micro USB Connector
BACK SIDE

  1. Fixing Nut (1/4-20 UNC 4.5mm)
  2. Magnetic Force Detection Area
  3. Ventilation Hole

 

Install PC applications

Application download

Please download from this link and install.

Application PC Requirements

LOG-1 uses Windows applications for changing device settings and exporting movies.
PCs that meet the following specifications are required to use this product.

Components Specifications
OS Windows 8.1 / Windows 10 (recommended)
Memory 2GB (4GB or more recommended)
HDD free space (for installation) 1GB or more
Graphics DirectX11 or greater
USB port USB 1.1 or higher (1.1 / 2.0 / 3.0)
Display 960×768 or higher
  • Operation is not guaranteed for all PC environments.
  • The above OS must be installed at factory shipment.
  • We can not guarantee the operation in the multi-boot environment.
  • Other applications may affect operation.
  • Depending on the content of the work, the required PC specifications differ.
  • It is recommended to use various drivers with the latest version.
  • Company name, product name, service name listed are trademarks or registered trademarks of each company

How to download and install applications

  1. Open “XonLog1_Setup_1.x.x.exe” with administrative privileges.
  2. Read the application licensing terms link (software license) and check the check box, then click the install button.
    Log-1_application_install
  3. Click on “Yes” to confirm.
  4. Installation will begin. (Installation time may vary depending on the speed of your PC)
  5. When the installation is complete click “Close”.
  6. Shortcut icons for the two applications will be displayed on the desktop.

LOG-1 Applications

XON LOG-1 Utility

Application for extracting and deletion of LOG-1 of settings and data.

XON LOG-1 Overlay Movie Exporter

Application for combining data LOG-1 has obtained and overlaying data onto recorded video.

XON LOG-1 Date Correction

This application can be used to correct the date and time of videos/LOG-1 files.

Battery Installation

  1. Loosen the screw and remove the battery cover.
  2. Please insert the battery cell so that the plus side of the battery cell is facing the cover.
  3. After inserting the battery cell, attach the battery cover again and tighten the screw.
NOTE
・If the battery cover is not installed properly, there is a danger of water entering the device.
・Inserting the battery incorrectly may damage the equipment.
・Battery life is typically about 1 week during recording, about 2 weeks in sleep mode.
・Please be careful not to lose the screw of the battery cover.
・When loosening the screw, please use a number 0 Phillips screwdriver. (If you use an incorrect screwdriver you may cause damage to the screw head)

Connecting with a PC

  1. Remove the rubber cap and connect to a PC with the supplied Micro USB cable.
  2. To disconnect from a PC, remove the USB cable and attach the rubber cap again.
NOTE
・If the rubber cap is not installed properly, there is a danger of water entering the device.
・Batteries cannot be charged via USB power.
・Features (such as logging etc.) cannot be used when connected to a PC.
・Please use the device under USB 1.1.

Set device time

LOG-1 sensor data and videos captured by the camera are combined in the PC application. In order to prevent the mismatched video and sensor data, you will need to match both the time of the camera and LOG-1 before sensor data acquisition.

Please note, the camera and LOG-1 may not be able to synchronize exactly via setting the device time. Please see [How to synchronize exactly] for a more accurate method of synchronization.

Adjust the time on the camera

Please refer to the time adjustment in accordance with the instructions of the camera being used.
If you are using REC-1, you can set the time by connecting LOG-1 and REC-1. Please refer to the REC-1 manual page for more information.

Adjust the time on LOG-1

  1. Install the application on a PC.
    (Click here for how to install.)
  2. Insert a button battery into LOG-1. If time has not been set before, the LED will flash green.
    (Click here for how to insert the battery.)
  3. Remove the front cover of the main body and connect to a PC.
    (Click here for how to connect.)
  4. Start the XON LOG-1 Utility.
    Log-1_utirity_home
  5. Connect LOG-1 to the PC, and click “Scan Device”.
    Log-1_utirity_scan_device
  6. If a device is recognized, click “OK”.
    Log-1_utirity_scan_device_ok
  7. Click “Set Device Time” to set the time.
    Log-1_utirity_set_device_time
  8. Click the “OK” button.
  9. Confirm that the LED is not blinking and click the “Close” button to close the Utility.