LOG-1

Can you use LOG-1 at a public race?

Regulations vary from race to race. Please check the race regulations before using LOG-1.

Cerevo does not endorse or guarantee sensor data for competition judgment.

Can you charge the battery or use a mobile battery?

LOG-1 operates with a coin battery (CR2032), it can not be recharged or powered by a mobile battery.

When the battery runs out, please exchange with a new CR2032 coin battery, refering to the following manual page.

Battery Installation

Can you use a cable other than the included USB cable?

You can use a USB cable other than the one included in the box to connet to your PC.

However, Cerevo does not guarantee operation with 3rd party USB cables.

How many activity log hours can LOG-1 save?

About Memory Capacity

Max. Logging Count

Max. 64 Times

Max. Sample Numbers

Approximately 860,000 Samples

Sampling Ratio	Total Recordable Time
12.5 Samples / sec (Every 80ms)	Approximately 19 hrs
1 Sample / sec (Every 1000ms)	Approximately 240 hrs

These values are the maximum values without erasing data.
If either maximum value is reached, logging will not continue, please extract and erase data to start logging again.
Please set sampling ratio via the PC application.

Can you use LOG-1 data with other software?

When data is saved to a PC using the XON LOG-1 Utility, the data values are output as a comma-separated text file. This text file may be used with other software.

If you change the log data file or edit the filename, it may not be possible to use the file with XON LOG-1 Overlay Movie Exporter.

How to check the device serial number

Connect LOG-1 to a PC.
Click the “Scan Device” button.
A 20 digit number, XXXXXXXX-XXXX-XXXXXXXX, will be displayed on the right side (9).

Are there any apps other than Windows?

You have to use the Windows application to operate LOG-1.

Mac and Linux are currently unsupported (operation within a multi-boot environment is not guaranteed).

Also, you cannot use LOG-1 with a smartphone or tablet.

About requirements for LOG-1 application

Application PC Requirements

LOG-1 uses Windows applications for changing device settings and exporting movies.
PCs that meet the following specifications are required to use this product.

Components	Specifications
OS	Windows 8.1 / Windows 10 (recommended) *Cerevo cannot guarantee operation in a multi-boot environment.
Memory	2GB (4GB or more recommended)
HDD free space (for installation)	1GB or more
Graphics	DirectX11 or greater
USB port	USB 1.1 or higher (1.1 / 2.0 / 3.0)
Display	960×768 or higher

Can you use LOG-1 without the app?

No, the LOG-1 application is needed to use the LOG-1 system. Please install the application before using LOG-1.

Install PC applications

Can you use LOG-1 without an internet connection?

LOG-1 connects to the internet to perform the following actions.

Updating firmware
Online help

If there is no internet connection available, LOG-1 cannot perform these actions, all other functions will be available.